Download Evercoss USB Drivers All Models with installation guide

If you want to connect your Evercoss mobile to PC, but the computer cannot detect and interact with it, then you have to install Evercoss USB drivers to make a secure connection. From this post, you will get the latest and official USB drivers.

A note to mention, all USB drivers are free, and as freeware, we have shared them on this article. Also, these drivers will work on Windows computers only; you cannot use them on Linux or Mac. Now, if you are still confused, then let’s check out what is Evercoss driver and why do you need one.

Evercoss USB Drivers Download for All Models

What are Evercoss USB Drivers?

The USB driver is a small all-in-one software for the Windows system that enables PC to detect and interact with the smartphone connected via USB cable. Often, the driver comes with the device by default; however, if your smartphone does not have it, then you have to get it separately.

Typically, the smartphone connects to the PC when you plug in them through the data cable. However, often, you will find that your PC cannot detect the connected phone. In that case, you must download and install an Evercoss USB driver for a better connection. It is a driver software for Windows OS that enables the PC to connect and interact with the Evercoss smartphone quickly.

Why do you Need Evercoss USB Drivers?

The primary purpose is to connect the device to the PC properly. Then you can transfer files and documents between Windows PC and mobile. Another reason is to connect the device to the PC for flashing the stock firmware.

You will have to install the USB driver if you need a secure and seamless connection between PC and mobile. Using the Evercoss driver, Windows computers can detect and interact with the connected device. Also, the USB driver lets the Windows OS use command prompt from PC to phone. The users need to download and install Evercoss USB drivers if they need to flash the stock firmware, install custom ROM, write IMEI, or test a mobile app. Also, you can use this driver if you want to back up your phone to mobile.

Features of Evercoss USB Drivers

  • The Evercoss USB Drivers are for Windows computers.
  • These drivers will support Windows 10, Windows 8, Windows 7, and Windows XP. Even the 32-bit and 64-bit systems support the drivers too.
  • The driver will be installed quickly because of the small file size.
  • You can use these drivers for only Evercoss smartphones.
  • All Evercoss USB Drivers are 100% safe.
  • The drivers come with the execution package.
  • All drivers are official and original.

How to Download Evercoss USB Drivers for Windows 7/8/10

We have listed the Evercoss drivers based on device models. Now, find out your Evercoss mobile model and download the exact driver corresponding to the model numbers.

  • To download Evercoss USB Drivers, click on the “Download” button, and the zip file will be downloaded on your computer.
  • The download process will take a few seconds to one minute, depending on your internet speed.
  • Once the download is completed, you will see the setup software inside the zip file from the download folder.

Some Important Driver: 

All Evercoss USB Drivers Download Link

How to Install Evercoss USB Drivers on Windows PC

In this section, we will explain how to install Evercoss drivers on Windows PC as clearly as possible. If you are a beginner and need to use this driver, then read the installation guide carefully and follow the instructions correctly.

Step 1: Connect your Evercoss device to PC using a standard data cable.

Step 2: Go to the download folder on your PC and locate the driver. If you have downloaded the driver yet, then click on the “Download” button and get the driver.

Step 3: Now, extract the driver from the zip file using any data compression software.

Step 4: Click on the “Start” button from the bottom left corner and go to the “Control Panel” option.

Step 5: Double-click the “Device Manager” and find your computer name in the top section.

Step 6: Now, double-click on the computer name and click on the “Action” menu and select the “Add legacy hardware” option

Step 7: Click the “Next” button, and it will launch the hardware wizard.

Step 8: Now, select to “Install the hardware that I manually select from a list (Advanced)” and click on the “Next” button.

Step 9: Select the “Show All Devices” and click the “Next” button again.

Step 10: Now, click the “Have Disk” button.

Step 11: Click on the “Browse” button and locate the driver you have extracted in the first step.

Step 12: When the driver is listed, click the “Open” button and press the “Next” button again.

Step 13: Then, the Windows Security box will come, and you need to confirm if you want to install the driver from this source. Select the “Install this driver software, anyway” option.

After that, the device manager will install the Evercoss USB Drivers on your Windows computer. It may take several seconds to one minute.

Step 14: After completing, click on the “Finish” button to close the “Add Hardware Wizard” option.

If you have completed the above steps correctly, you have successfully installed the Evercoss Driver on your Windows computer. Now, you will see the driver is installed and listed in the device manager under the “Ports” option. You can connect your Windows PC to Evercoss devices quickly and transfer files or flash the stock ROM.

Developer Credit: The respective developers are the sole owners of all drivers we have listed on this page. We are sharing the official drivers as freeware. All credit goes to the company for releasing and distributing such excellent and useful drivers for us.

So, guys, this is all about Evercoss USB drivers for all models. We have discussed the installation guide with step by step process for beginners. Using this driver, we hope you have connected the Evercoss device to PC successfully.

Notify of
Inline Feedbacks
View all comments