Marvell Write Tools is a small protocol that was created by Marvell Technology Group Ltd. If you want to know how to use Marvell Write Tools, you’re in the right place. In this post, you will learn about its uses, features and many more things. This tool is for Windows computers and works for flashing IMEI on devices running the Marvel Chipset. You can use it to flash on multiple IMEI on Android Devices. On the other hand, you can also customize the custom IMEI, although it’s illegal, and you might be in a problem. So you have to use this tool in a legal way.
Pre-Requirements of using this tool:
- Charge your device before flashing.
- Don’t use it for other purposes while flashing.
- Make sure you have a computer.
- Back up your Phone before flashing.
How to Use Marvell Write Tools
There will be some steps and ways to use this tool. I’ll describe all of this. Follow the steps below to use this tool in the right way. The steps are:
Caution: Before you flash your device, make sure to back up your Phone. Flashing may wipe all data from the Phone. So you should back up before flashing.
Step 1: First of all, you need to download and install the Marvell USB Driver on your computer. If you downloaded it before, skip this step.
Step 2: Connect your Marvell Mobile Device to the computer and make sure your device is in Power On mode.
Step 3: Now extract the Marvell Write Tools on the computer. After extracting the tool, you will see some files there. Keep the page; you will need it later.
Step 4: To launch the tool, open the Marvell_WriteTools_P.exe.
Step 5: After launching the tool, you will see a screen.
Step 6: Now, click on the Login menu and enter the Password SHHIPAD to log in.
Step 7: Click on the Settings menu.
Step 8: Under the Type Dropdown, select Phone.
Step 9: Select the Model from the Dropdown.
Step 10: Under SN, IMEI, Set the length and range of the number. It should not be empty. Otherwise, there will be a prompt box.
Step 11: Now click on the OK button.
Step 12: Under the IMEI, input the IMEI number.
Step 13: To start the flashing process, click on the Start button.
Step 14: After completing the process, you will see a Green Tick on the computer screen.
Step 15: Now, disconnect your device from the computer and restart your Phone.
You did the flashing process successfully. It is an open-source tool which means you can download it without any cost. This tool runs smoothly on Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1 and Windows 10. This tool will allow you to flash multiple IMEI device running on Marvell Chipsets. The process is very easy even though the device is different. You just have to use the IMEI number of the device, and the steps I described will remain the same.
Important: If you want to know the current IMEI number of your device, Dial *#06# from your device. You can also find it on the device’s back sticker. After removing the battery, you can see the sticker and number on it.
Note: MTKArena won’t be responsible for damaging your device. You have to do it at your own risk.
Final Verdict: If you want to flash its unoriginal version, it will be illegal in some countries, and it may fall you in trouble. Use this tool carefully. I hope all the ion formation in this article will help you and you know how to use Marvell Write Tools. If you have any questions about this topic or any technological issue, feel free to comment below. Our expert team will help you. Thank you for reading the full article.