Fly USB Drivers Download for All Models

Are you looking for the Fly USB drivers? Well, you have found the right post. Here, we have researched and accumulated all available Fly drivers for you. These drivers are free and original. However, you can only use them on Windows systems. We have listed the drivers based on device models. So you can find the matching driver for your device easily.

What are Fly USB Drivers?

Fly USB driver is a small software for Windows OS that lets the PC to connect and interact with the smartphone quickly. Typically, after joining the device to the PC via USB cable, the computer is supposed to detect the device. And it does like the manual. However, in that state, you can only share files or getting back up, but you cannot change anything, such as flash the ROM or add/ delete the default app on the phone. To do these tasks, you need to download and install the relatable USB drivers. If you are using Fly mobile, then our listed driver will do the work for you.

Fly USB Drivers

Why do you Need Fly USB Drivers?

The USB driver is required if you need a secure and seamless connection between PC and mobile. Using this driver, Windows computers can detect and interact with the connected device. Also, the driver lets the Windows OS use command prompt from PC to phone. The users need to download and install Fly USB drivers if they need to flash the stock firmware, install custom ROM, write IMEI, or test a mobile app.


  • All Fly USB Drivers are for Windows computers.
  • The drivers will support Windows 10, Windows 8, Windows 7, and Windows XP. Even the 32-bit and 64-bit systems support the drivers too.
  • The driver will be installed quickly.
  • You can use these drivers for only Fly smartphones.
  • All Fly USB Drivers are 100% safe.

How to Download Fly USB Drivers for Windows 7/8/10

There are multiple Fly USB Drivers you will see on this page. Now, find out your Fly mobile model and download the exact driver corresponding to the model numbers.

  • To download Fly USB Drivers, click on the “Download” button, and the zip file will be downloaded on your computer.
  • The download process will take a few seconds to one minute, depending on your internet speed.
  • Once the download is completed, you will see the setup software inside the zip file from the download folder.

You Must Check:

USB Driver Type: CDC Driver
USB Driver Purpose: For flashing Stock firmware on your device.

USB Driver Type: ADB Driver
USB Driver Use: For connecting your device to a computer.

USB Driver Type: VCOM Driver
USB Driver Purpose: For flashing Stock firmware on your device.

MTK Driver Auto Installer

Download Fly USB Drivers All Model

How to Install Fly USB Drivers

If you still cannot figure out how to install Fly USB Drivers on your Windows computer, then read the steps below and follow them accordingly.

Step 1: Connect your Fly device to PC using a standard data cable.

Step 2: Go to the download folder on your PC and locate the driver. If you have downloaded the driver yet, then click on the “Download” button and get the driver.

Step 3: Now, extract or unzip the driver RAR file using any data compression software.

Step 4: Click on the “Start” button from the bottom left corner and go to the “Control Panel” option.

Step 5: Double-click the “Device Manager” and find your computer name in the top section.

Step 6: Now, double-click on the computer name and click on the “Action” menu and select the “Add legacy hardware” option

Step 7: Click the “Next” button, and it will launch the hardware wizard.

Step 8: Now, select to “Install the hardware that I manually select from a list (Advanced)” and click on the “Next” button.

Step 9: Select the “Show All Devices” and click the “Next” button again.

Step 10: Now, click the “Have Disk” button.

Step 11: Click on the “Browse” button and locate the driver you have extracted in the first step.

Step 12: When the driver is listed, then click the “Open” button and press the “Next” button again.

Step 13: Then, the Windows Security box will come, and you need to confirm if you want to install the driver from this source. Select the “Install this driver software, anyway” option.

After that, the device manager will install the Fly USB Drivers on your Windows computer. It may take several seconds to one minute.

Step 14: After completing, click on the “Finish” button to close the “Add Hardware Wizard” option.

If you have completed the above steps correctly, then you have successfully installed the Fly Driver on your Windows computer. Now, you will see the driver is installed and listed in the device manager under the “Ports” option. You can connect your Windows PC to Fly devices quickly and transfer files or flash the stock ROM.

Developer Credit: The respective developers are the sole owners of all USB drivers we have listed on this page. We are sharing the official drivers as freeware. All credit goes to the company for releasing and sharing such amazing and useful drivers for us.

Notify of
Inline Feedbacks
View all comments